Update on Project Stevo!

[StevoSRT]

So,


- BES/HHP Forged 6.1 Hemi
- HHP Stage 1 Cam
- Diamond Low Compression (9 to1) Piston
- PPP Stage 2 Meth Kit
- Modern Muscle Stage 3 Fuel System
- 50mm TiAL Sport Blow Off Valve
- Intercooler (not decided on which one yet)
- Vortech T-Trim Supercharger with high boost pully setup
- BT Ported Throttle body
- RDP 2800 High Stall Torque Converter
- Autometer Gauges
- DSS Level 5 1000hp Halfshafts

I have listed in bold the new items haha

There may be more....:D

Just know...theres gonna be a lot of ponies coming out of this 6.1 hahahaha

For wheels and tires, at the moment I will be putting on a set of NT05 Nittos on the back to try and keep up some traction....if its still a PITA to keep myself out of a ditch ;) ill get bigger meat LOL

[Vinnysrt8]

sweet where is this gonna get done

[CHARGERTREV]

When is it getting here?

[DragginWagon]

Stevo, I think in your excitement about getting some big fat meat in the back you failed to actually list the new items in bold.

[paxton]

Stevo, I think in your excitement about getting some big fat meat in the back you failed to actually list the new items in bold.

Hahahaha....Seriously Steve, its an impressive list so far, but since your building a pursposely built motor why don't you get some heads for it also. At this point its not that much more money and shouldn't really affect the labor at all for putting them on. Just think...a H/C car with alot of boost. Freakin' car will be sick!:thumbsup:

[DevssrT]

Nice list of mods...but heads should be in there also...just my opinion..

[SnowMan!]

Im glad to see you finally got off the shitter!! Im really digging the build that you have listed so far. Seems like everyone has a point on the Heads issue, but its your money. Nice choice of shop as well.

[HEMISFEAR]

Stevo, it's going to be an awesome build bro. It'll take time and some headaches but it will be worth it in the end. You can widen your wheels to 10.25 inches and use a 1/4" wheel spacer available from BT or you can do some inner fender well work to allow them to fit on the inside better. I also have a deal that I didn't snatch up on a brand new methanol kit that doesn't appear to have sold yet. You may want to consider it and see if you can knock the price down a tad. But it's already a good bargain.

http://lxforums.com/board/showthread.php?p=2092542#post2092542

[StevoSRT]

sweet where is this gonna get done


When is it getting here?

That will depend on $$ and Time at this point hahaha....

Erik (HEMI31) will do the Supercharger....

The rest will either be done down at HHP or by AJ. Both to me are equally qualified shops that will do a great job, but time and money will probably determine when and where this gets done.

When I get a final parts list I will quote the various places haha


Stevo, I think in your excitement about getting some big fat meat in the back you failed to actually list the new items in bold.

No it just didnt bold as a copy and paste....it should be fixed now haha


Hahahaha....Seriously Steve, its an impressive list so far, but since your building a pursposely built motor why don't you get some heads for it also. At this point its not that much more money and shouldn't really affect the labor at all for putting them on. Just think...a H/C car with alot of boost. Freakin' car will be sick!:thumbsup:


Nice list of mods...but heads should be in there also...just my opinion..


Im glad to see you finally got off the shitter!! Im really digging the build that you have listed so far. Seems like everyone has a point on the Heads issue, but its your money. Nice choice of shop as well.

Well Heads will be in there at some point but unless you guys are gonna give me some $$ for a heads/cam package its gonna have to wait hahahaha..

:D

[StevoSRT]

Stevo, it's going to be an awesome build bro. It'll take time and some headaches but it will be worth it in the end. You can widen your wheels to 10.25 inches and use a 1/4" wheel spacer available from BT or you can do some inner fender well work to allow them to fit on the inside better. I also have a deal that I didn't snatch up on a brand new methanol kit that doesn't appear to have sold yet. You may want to consider it and see if you can knock the price down a tad. But it's already a good bargain.

http://lxforums.com/board/showthread.php?p=2092542#post2092542


Thanks buddy it says "sold" though haha....

so yeah is it "or" do some inner wheel work or "and" do some inner wheel work... haha....i just want some nice thick meat

[HEMISFEAR]

Thanks buddy it says "sold" though haha....

so yeah is it "or" do some inner wheel work or "and" do some inner wheel work... haha....i just want some nice thick meat

Sorry, didn't catch the very first post haha.

It's "OR" do some inner fender work. Jason is doing his and will probably get them done before you do so I'd keep an eye out on his Wheel widening thread or PM him since he'll be going with a 305. Chris has his done but only runs 295's.

[StevoSRT]

Sorry, didn't catch the very first post haha.

It's "OR" do some inner fender work. Jason is doing his and will probably get them done before you do so I'd keep an eye out on his Wheel widening thread or PM him since he'll be going with a 305. Chris has his done but only runs 295's.

hehehehe sweeeeeeeeet

I DEMAND THICK MEAT!!!!!!!!!!! :obscene:

[markus]

did you even figure out if its a 392 yet lol

[StevoSRT]

did you even figure out if its a 392 yet lol

its a 6.1 hahaha...

the low compression 392 is whats going in HIS car lol

[cheatek]

Stevo, where'd you get that money tree again, I REALLY need one of those bro!!

[Vinnysrt8]

I need 2 money trees.

[HEMISFEAR]

Stevo, where'd you get that money tree again, I REALLY need one of those bro!!

It's called no mortgage, no kids, no wife, no rent, no real responsibility!! Ahhh, the days of our Yoot Scotrand. Hahahaa, I slay myself.

[paxton]

It's called no mortgage, no kids, no wife, no rent, no real responsibility!! Ahhh, the days of our Yoot Scotrand. Hahahaa, I slay myself.

Exactly........freakin' young prick!!!!!!!!!:D

[cheatek]

It's called no mortgage, no kids, no wife, no rent, no real responsibility!! Ahhh, the days of our Yoot Scotrand. Hahahaa, I slay myself.


Exactly........freakin' young prick!!!!!!!!!:D

Yea I remember those days but still, I never had as much money as he has!! It's just oozing from the fugger's pours or something!!

[SRT8bby]

Eh, just leave Stevo alone.............


After all you do realize that 'Project Stevo' is about his upcoming sex change, right?..

[cheatek]

Eh, just leave Stevo alone.............


After all you do realize that 'Project Stevo' is about his upcoming sex change, right?..

OMG LMFAO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[StevoSRT]

Stevo, where'd you get that money tree again, I REALLY need one of those bro!!


I need 2 money trees.


It's called no mortgage, no kids, no wife, no rent, no real responsibility!! Ahhh, the days of our Yoot Scotrand. Hahahaa, I slay myself.


Exactly........freakin' young prick!!!!!!!!!:D


Yea I remember those days but still, I never had as much money as he has!! It's just oozing from the fugger's pours or something!!

hehehehehehe

its called i was a nerd in college....had 5 internships...graduated national honor socioty...top 5% of my class...and got a good job :)....hehehehehe


Eh, just leave Stevo alone.............


After all you do realize that 'Project Stevo' is about his upcoming sex change, right?..

GOD DAMNIT THAT WAS SUPPOSTA BE A SURPRISE!!!!!

[paxton]

Eh, just leave Stevo alone.............


After all you do realize that 'Project Stevo' is about his upcoming sex change, right?..

Now that's some funny shit right there!!!!!!:ROTFLMAO: I knew there was something about him that didn't seem right when I met him up at the Hooters a few weeks back. He kept lookin at me like I was some sort of beefsteak or something!:D

[cheatek]

Now that's some funny shit right there!!!!!!:ROTFLMAO: I knew there was something about him that didn't seem right when I met him up at the Hooters a few weeks back. He kept lookin at me like I was some sort of beefsteak or something!:D

LMAO!!!! Well you ARE some sort of beefsteak, lol!!:obscene:

[paxton]

LMAO!!!! Well you ARE some sort of beefsteak, lol!!:obscene:

You really know how to stroke a man's ego don't you!!!!!!!!:jackoff::agree:

[StevoSRT]

You really know how to stroke a man's ego don't you!!!!!!!!:jackoff::agree:

oh he strokes something

[DevssrT]

Ok guys...whats the deal with this Stevo...you give us an update once then the thread turns gay....whats the deal with your build?

[StevoSRT]

Ok guys...whats the deal with this Stevo...you give us an update once then the thread turns gay....whats the deal with your build?

hahahahahahaha

the deal is that im waiting for chris who is rebuilding my motor to talk to Josh at HHP about my new piston heads to ensure they will work properly...

once that happens...i have to order the new piston heads...and chris needs to get tehm...and install them...

once that happens, hopefully my new upgraded fuel rails will arrive so I can have it all installed with the new motor next month....

once the motor is in....i can schedule my supercharger ect...install....

then the beast lives :)

[HEMISFEAR]

Good luck buddy.

[SRTLUVR]

Please keep us posted!! Eager to hear results dude!!
Chase

[StevoSRT]

Please keep us posted!! Eager to hear results dude!!
Chase

if im not a douche and i can remember my cam i will vid the dyno session :)

[StevoSRT]

Update (Post #1 has new stuff highlighted in red):

- Josh at HHP has ordered me my 9 to 1 Custom weighted Pistons for the motor. They should be in in a couple of weeks. Once they come in, Chris (HEMI~C~) is going to build the motor. He has the motor torn down right now and its all ready to go.

- I am sending the Vortech S Trim blower back to them...and getting a T Trim blower back :). The bigger blower can handle more boost. This is the blower that Lisa had in the mustang when she put down 690rwhp from a 4.6 (this was before she stroked the motor out). I am also getting the same 50mm BOV that HEMI~C~ is running in the Magnum. This saved him a lot of stupid little problems like hoses coming off and so on and on his suggestion, i will put this on as well.

- I will be going with a fully upgraded Modern Muscle Stage 3 Fuel system. This system has all new braided lines, upgraded fuel rails, larger injectors, and a dual pump setup. I will be able to feed this thing as much fuel as its going to need.

- To go along with the Meth system, I will be adding a bigger and better Intercooler. I am talking things through with chris now on which one, so when a decision is made, I'll update lol.

[paxton]

Update (Post #1 has new stuff highlighted in red):

- Josh at HHP has ordered me my 9 to 1 Custom weighted Pistons for the motor. They should be in in a couple of weeks. Once they come in, Chris (HEMI~C~) is going to build the motor. He has the motor torn down right now and its all ready to go.

- I am sending the Vortech S Trim blower back to them...and getting a T Trim blower back :). The bigger blower can handle more boost. This is the blower that Lisa had in the mustang when she put down 690rwhp from a 4.6 (this was before she stroked the motor out). I am also getting the same 50mm BOV that HEMI~C~ is running in the Magnum. This saved him a lot of stupid little problems like hoses coming off and so on and on his suggestion, i will put this on as well.

- I will be going with a fully upgraded Modern Muscle Stage 3 Fuel system. This system has all new braided lines, upgraded fuel rails, larger injectors, and a dual pump setup. I will be able to feed this thing as much fuel as its going to need.

- To go along with the Meth system, I will be adding a bigger and better Intercooler. I am talking things through with chris now on which one, so when a decision is made, I'll update lol.

Sounds like your taking your time and thinking things through while learning from others mistakes and experiences! Maybe your smarter than you actually look!!!!!!hahahahaLOL:thumbsup:

[CHARGERTREV]

Is that piece of shit done YET!?!?

[c love]

Stevo,

Congrats on the build. Gonna be a mean ride.
Make sure you post up pics and be careful. As much as we love ya, you do not wanna
be this years "DITCH BOY" member!!!!!

[HEMISFEAR]

Sounds like your taking your time and thinking things through while learning from others mistakes and experiences! Maybe your smarter than you actually look!!!!!!hahahahaLOL:thumbsup:

Yeaaahhhh, he'd better listen to those who know what they're doing. This build is getting more complex by the day. Good luck buddy. I'd be a bit nervous getting everything dialed in but I'm sure you've got some knowledgeable people working on it.

[StevoSRT]

Sounds like your taking your time and thinking things through while learning from others mistakes and experiences! Maybe your smarter than you actually look!!!!!!hahahahaLOL:thumbsup:

i have my moments LOL


Is that piece of shit done YET!?!?

aaaaand whos the one ordering the pistons?...oh yeah...YOU GUYS! lol...so suck it lol


Stevo,

Congrats on the build. Gonna be a mean ride.
Make sure you post up pics and be careful. As much as we love ya, you do not wanna
be this years "DITCH BOY" member!!!!!

unlike ditch boy i know how to control myself on cold days with a mega powered car LOL


Yeaaahhhh, he'd better listen to those who know what they're doing. This build is getting more complex by the day. Good luck buddy. I'd be a bit nervous getting everything dialed in but I'm sure you've got some knowledgeable people working on it.

Thats why I am not doing any of it LOL...

I have Chris helping me on what to get...Josh at HHP ensuring what I get is right....Chris installing the motor, Erik doing more of the install, and then the supercharger and the tuning (and whatever is left to install) will be done by AJ (HEMITUNER)....i would say im probably ok :-D :thumbsup:

[cheatek]

pending ... pending ... pending ... :)

[StevoSRT]

pending ... pending ... pending ... :)

The build has started :D

Pend this bitch biteme

hehehehehehehehehehehehe

[cheatek]

The build has started :D

Pend this bitch biteme

hehehehehehehehehehehehe

Cool brutha, that thing is gonna be a BEAST when it's all done, dayam!! :bow:

[StevoSRT]

Cool brutha, that thing is gonna be a BEAST when it's all done, dayam!! :bow:

yeah...its lame that i wont have the car for part of the build time but it will be for the better in the end :thumbsup:

i THINK my parts list is done though...the only thing i have left to do is get my T trim blower back from vortech and get an upgraded intercooler...ill choose an intercooler when i speak with Chris (HEMI~C~)

[cheatek]

yeah...its lame that i wont have the car for part of the build time but it will be for the better in the end :thumbsup:

i THINK my parts list is done though...the only thing i have left to do is get my T trim blower back from vortech and get an upgraded intercooler...ill choose an intercooler when i speak with Chris (HEMI~C~)

DANG I want one of those money trees you got! (btw shake it to get enough money to get a garage will ya, lol)

[StevoSRT]

DANG I want one of those money trees you got! (btw shake it to get enough money to get a garage will ya, lol)

well, its called dont have any kids or a wire or your own place or anything that belongs to you but your cars and you could mod like me too LOL

things will change when Jesse and I move in...which is why she told me to do it all now hahahaha

[cheatek]

well, its called dont have any kids or a wire or your own place or anything that belongs to you but your cars and you could mod like me too LOL

things will change when Jesse and I move in...which is why she told me to do it all now hahahaha

Ah, I keep forgetting how youngun you are, lol! She's right, DO IT ALL NOW!!! :D

[StevoSRT]

Ah, I keep forgetting how youngun you are, lol! She's right, DO IT ALL NOW!!! :D

dont think its cause she doesnt like modding cars


she wants me to be done so we can do her car LOL

[HEMISFEAR]

Do her car? LOL. That's great! Good luck on the build man.

[StevoSRT]

Do her car? LOL. That's great! Good luck on the build man.

haha yeah she likes varoom varoom too

[cheatek]

what's her car?

[StevoSRT]

what's her car?

dont know yet, shes buying a new one at the end of the summer...

it will depend on how much she wants to spend and what catchs her eye :D

[cheatek]

dont know yet, shes buying a new one at the end of the summer...

it will depend on how much she wants to spend and what catchs her eye :D

shit, she's planning on modding it yet hasn't even bought it yet???? MARRY THAT WOMAN!!!!!!!!!!!!! :grinyes:

[StevoSRT]

shit, she's planning on modding it yet hasn't even bought it yet???? MARRY THAT WOMAN!!!!!!!!!!!!! :grinyes:

hahahah workin on it big daddy!

[cheatek]

Stevo HTH you gonna smog that beast once it's done?!?! Isn't your area out there as bad as Nazi-land here??

[StevoSRT]

Stevo HTH you gonna smog that beast once it's done?!?! Isn't your area out there as bad as Nazi-land here??

no i dont live in Cali lol...

its not as bad...its not great but not as bad at all....

and i think Tony will have a harder time than i will passing :D

I have a pretty mild cam, and the kooks do have "cats" with them lol

[HEMISFEAR]

It'll really only be the cam you'd need to worry about if it was all legit anyways...and maybe the visual inspection on the longtubes. lol..

[StevoSRT]

It'll really only be the cam you'd need to worry about if it was all legit anyways...and maybe the visual inspection on the longtubes. lol..

hopefully since its a mild cam it wont be an issue

[cheatek]

hopefully since its a mild cam it wont be an issue

HOPEFULLY?!?!?! lol

[StevoSRT]

HOPEFULLY?!?!?! lol

we will find out now wont we LOL

[StevoSRT]

- BES/HHP Forged 6.1 Hemi
- HHP Stage 1 Cam
- ROSS Low Compression (9 to1) Piston
- PPP Stage 3 Snow Water/Meth Kit
- Modern Muscle Stage 3 Fuel System <-- Being replaced by something less of a ripoff and higher quality :)
- 50mm TiAL Sport Blow Off Valve
- Intercooler (not decided on which one yet)
- Vortech T-Trim Supercharger with high boost pully setup
- BT Ported Throttle body
- 2800 High Stall Torque Converter
- Autometer Gauges
- DSS Level 5 1000hp Halfshafts

So as an update to my update....

what is in so far (as of 7/10):

- BES/HHP Forged 6.1L motor with 9 to 1 Compression Ross Pistons.
- HHP Stage 1 Cam
- 1000hp DSS Level 5 Halfshats
- BT Ported Throttle BOdy
- BWoody Thermal Intake Spacers
- Autometer A/F Gauge
- ProTorque 2800 High Stall Converter

Whats Next (Date: TBD):

- Vortech V3 system with a T Trim Blower Upgrade
- Snow Stage 3 Water/Meth System
- Upgraded Fuel System
- 50mm TiAL Sport Blow Off Valve
- Autometer Fuel Pressure/Boost Gauges
- Tuning

The reason the date is TBD is that I have to get some miles on the motor before chris is comfortable strapping on a higher boost blower. Basically one oil change. The car will be complete by mid September. This is taking way longer than I had hoped but...shit happens...but in the end...ill be happy rolling around in a nice 650rwhp monster :D

[cheatek]

TBD ... another word for "pending" ... sigh

[StevoSRT]

TBD ... another word for "pending" ... sigh

so you would rather be blow up the new motor?

Gonna give me $$ for it? :D

:bj:

[HEMISFEAR]

Yeah, Chris knows what he's talking about. BUT, on the bright side, you can probably get some more racing in since the season doesn't end until late October I think. Good luck buddy. Chris actually has a smokin' deal on a forged shortblock right now that I was looking pretty closely at.

[StevoSRT]

Yeah, Chris knows what he's talking about. BUT, on the bright side, you can probably get some more racing in since the season doesn't end until late October I think. Good luck buddy. Chris actually has a smokin' deal on a forged shortblock right now that I was looking pretty closely at.

if i can get it up and running good enough...ill take it out once before I get the blower on to see what it runs with this setup NA

[cheatek]

so you would rather be blow up the new motor?

Gonna give me $$ for it? :D

:bj:

WTF, you're the one with the money tree!! :grinyes:

[StevoSRT]

the beast...fucking....lives.....

ill give a rundown tomorrow...im too tired to give a shit now lol

[HEMISFEAR]

Awesome news!! I'd be wiped too. Looking forward to the update buddy!

[StevoSRT]

Awesome news!! I'd be wiped too. Looking forward to the update buddy!

ya im dead lol....ill try to get my pics uploaded tonight

[paxton]

ya im dead lol....ill try to get my pics uploaded tonight

Ya, its gotta suck driving the car in the rain after the blower install. When it drys out...romp the shit out of it and let us know what you think. All I do know is this...your not going to hook that thing up at all anywhere in 1st gear and probably most of 2nd also with street tires.

[StevoSRT]

Ya, its gotta suck driving the car in the rain after the blower install. When it drys out...romp the shit out of it and let us know what you think. All I do know is this...your not going to hook that thing up at all anywhere in 1st gear and probably most of 2nd also with street tires.

uh YEAH that was a fun drive home....

boost kicked in on me about 4 times when it started to rain....i am NOT driving this god damn thing in the rain again LOL.....

and yeah....street tires....

I can break the tires loose at ANY mph below 60 or 70 lol

[paxton]

uh YEAH that was a fun drive home....

boost kicked in on me about 4 times when it started to rain....i am NOT driving this god damn thing in the rain again LOL.....

and yeah....street tires....

I can break the tires loose at ANY mph below 60 or 70 lol
So you sure you still want to race me!hahahahaha Street tires only my brotha!:D

[08srt8Calgary]

Glad to hear a project is wrappin up, and that it is yours. Looking forward to hearing about some dry runs

[Matt McKenzie]

Awesome news, can't wait to hear about it!

[HEMISFEAR]

That thing is a beast. Honestly,that can be pretty freakin scary stompin on it at 70mph and having that back end get loose LOL!! Awesome though. I forsee some 305 Nitto 555R's in your future "for the street". I don't think you have a choice there unless you just drive it like a grandma everywhere.