SRT8U
06-24-09, 01:54.51 PM
Attached is the dyno sheet from TECHCO'S Engine Dyno Testing yesterday. Power Output is actually 902HP/919Ft-Lbs with only 12psi of boost. We dyno’d the engine with our Diablo Sport CMR software and their custom dyno harness using all stock Dodge sensors. The engine was conservatively tuned to 16 degress of spark at peak RPM with race fuel. This is a customer engine so they did not push it, but this result shows us how much power potential is there as a starting point.
The configuration for the dyno test was as follows:
Strategy
68004308af
MAP
2Bar SRT4
Inlet Tube
Standard Techco SC Inlet Tube
Pulley
SC: 2.71", Crank: 7.5", 445mm Belt, 114mm Tensioner
TB:
Stock Dodge 80mm
Plugs
NGK Iridium IX Heat Range 7 6510 (Pre-Gapped to .044)
Injectors
Techco 60lb Injectors (Standard in SC Kit)
Fuel Pump
Dyno Pump w/Return Set to 60lbs
Air Filter
Techco SC K&N
Exhaust
Stock Headers, 3" Pipes
Engine
Techco 427, Forged Crank/Rods/Pistons, Cam, Ported Heads
Here is the Dyno Chart:
CLICK HERE
Keep in mind these are engine dyno numbers, but impressive nonethleless!
Next up is the first 09 5.7 Based 397 Stroker with Techco S/C...that is destined for our Challenger R/T...we will keep you posted on the results!
if anyone is interested in learning more about Techco Powerlab Stroker Motors, or Superchargers post up or call us at 877-BMC-RWHP!
The configuration for the dyno test was as follows:
Strategy
68004308af
MAP
2Bar SRT4
Inlet Tube
Standard Techco SC Inlet Tube
Pulley
SC: 2.71", Crank: 7.5", 445mm Belt, 114mm Tensioner
TB:
Stock Dodge 80mm
Plugs
NGK Iridium IX Heat Range 7 6510 (Pre-Gapped to .044)
Injectors
Techco 60lb Injectors (Standard in SC Kit)
Fuel Pump
Dyno Pump w/Return Set to 60lbs
Air Filter
Techco SC K&N
Exhaust
Stock Headers, 3" Pipes
Engine
Techco 427, Forged Crank/Rods/Pistons, Cam, Ported Heads
Here is the Dyno Chart:
CLICK HERE
Keep in mind these are engine dyno numbers, but impressive nonethleless!
Next up is the first 09 5.7 Based 397 Stroker with Techco S/C...that is destined for our Challenger R/T...we will keep you posted on the results!
if anyone is interested in learning more about Techco Powerlab Stroker Motors, or Superchargers post up or call us at 877-BMC-RWHP!