BJB's Jeep SRT8

[BJB]

Here is a brief summary;

BES 426 7.0 motor (fully forged)
BES Custom Intake manifold
Kooks LT headers catless, Jet Hot coated
B&B exhaust
Vortech YSI Supercharger (16lb - 22lb boost)
Direct Port Nitrous system
Progressive Nitrous controller
Custom intercooler (anodized black) with Nitrous spray bar
Custom Fuel tank
Aeromotive Fuel System (Fuel pump, boost referenced regulator and 2 filters)
90lb Bosh injectors
Modern Muscle 85mm Throttle Body
Super secrete transmission / transfer case
Trans Brake (oops!!)
DTS custom "Pro Stock" rear diff
Strange 35 spline axles
Interchangeable center sections (Spool / ARB locker)
Penske "Coil over" racing shocks
DTS custom Drive shafts (front and rear)
Paramount Performance Posi front diff (Dana 44 with Tru Track)
Richmond gear sets (front and rear)
Brembo Gran Tourism front brakes
Safecraft fire suppression system
Relocated battery with track cut off switch
Rear roll cage
Chase digital recording system

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/BRUNT006.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/Intake%20Manifold/IMG_0516.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/DSC01748.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/DSC01753.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/Drive%20Line/IMG_0536.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/Drive%20Line/IMG_0600.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/Drive%20Line/IMG_0602.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/Fuel%20Tank/IMG_0452.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/IMG_0220.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/IMG_0477.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/Roll%20Cage/P1010199.jpg

[Vinnysrt8]

cool get the picts us soon

[DevssrT]

Brief SUmmary??....Your crazy ahahaha....that is intense!

[Vinnysrt8]

wow that thing is so sexy

[CTS-Veo]

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/BRUNT006.jpg

As a machinist/welder, I have to say that intake is absolutely SEXY! Between that and your rearend, they should be on display not on a car...:thumbsup::drool::bananaplug::freak:

I can't wait to see her completley assembled!:racing:

[freemaSSon]

BOING!!!!!!!!!!!

[Blown-WK]

I think your thread got hijacked Brian.:D

[BJB]

I think your thread got hijacked Brian.:D

Got it all cleaned up ;)

[HEMISFEAR]

That Jeep is always a pleasure to see...can't wait to blast around in it Bri!

[DevssrT]

WOw..just WOW...those pictures are INSANE!...just a lil question...on you intake Bri, what exactly are those "breather" filters?...Do they make them for the 6.1?

[SSSkach]

Wholy friggin Crap---awsome!:racing::thumbsup::racing:

[BJB]

WOw..just WOW...those pictures are INSANE!...just a lil question...on your intake Bri, what exactly are those "breather" filters?...Do they make them for the 6.1?

The filters are now for show. 1 caps off the oil fill and the other has been plugged.

[DevssrT]

OHh ok gotcha...

[BJB]

Well, it looks like the Jeep is heading back to the Dyno within the next few day's. Nitrous system is installed, starter is fixed, it has just had every single feature massaged to perfection :D

The past week has been :bricks1:

But now it should be :racing:

Here are a few progress photo's

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Preditor/DSC05497.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Preditor/DSC05498.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Preditor/DSC05499.jpg

[Vinnysrt8]

wow i just wet my pants.

[Johnny--2k]

Holy Crap! That's HOT!

[Dr.Steve]

looking great Brian, it's been a long time coming, after two teases (memphis and Lonestar), we're all salivating at the thought of that beast coming to life and running like a raped giant ape :D

[BJB]

Here is a photo I forgot to post. This is the center counsel where all the switches were mounted.

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Preditor/DSC05450.jpg

[DBTBSS]

Looks Slow:grinyes:

[SRTLUVR]

Geezus Brian.....I've never seen pics dude. I am truly speechless. Holy shitfire.
Chase

[SRTLUVR]

Crap, I gotta work on my sig again.....Milan??
Chase

[DevssrT]

Lets see some number Bri!!...That thing is SICK!

[RichieRacer]

what are all those buttons for?

[BJB]

what are all those buttons for?
Crap.. I don't know!! :confused: :pounding table:

Something like, Nitrous arm, bottle heaters (2), remote openers (2), Dyno switch for the TCM, compressor switch (2), ARB locker, Red button is nitrous purge. It is all labeled now. I haven't seen the Jeep in a few weeks :Disappointed_anim:

But on the bright side I just got a text from DynoSteve and they will be tuning the beast this weekend. :racing:

[Derwood98]

Crap.. I don't know!! :confused: :pounding table:

Something like, Nitrous arm, bottle heaters (2), remote openers (2), Dyno switch for the TCM, compressor switch (2), ARB locker, Red button is nitrous purge. It is all labeled now. I haven't seen the Jeep in a few weeks :Disappointed_anim:

But on the bright side I just got a text from DynoSteve and they will be tuning the beast this weekend. :racing:

Brian, I had no idea you were going quite this far with your build. Great job! Like I told you at the track, too bad you just gave up 5k. :D Maybe we can do it again. I would love to see that bad boy in action.

[BJB]

Brian, I had no idea you were going quite this far with your build. Great job! Like I told you at the track, too bad you just gave up 5k. :D Maybe we can do it again. I would love to see that bad boy in action.

yea Darrin, I have a tendency to go "Balls Out" on things, LOL. The team is sure hoping for a 9 of some sort. 9.99 works for me :D

With DynoSteve and RDP and Jersey Boy (Wilson) working on it, you can't ask for better people.

[HEMI Chef]

Sweet sassafras!! That's one bitchin' jeep!!

[swexlin]

Nice truck. Let me say it again, that's a HOT truck.

[BJB]

Just got a call from DynoSteve. Jeep is smoking all 4's on the dyno this morning :grinyes:

Wilson is on his way also, should be a good day! I will post up some info as it becomes available :cloud9:

[BJB]

Well, DynoSteve and Wilson worked on the Jeep most the day today. They were very pleased as to how she was running. On the down side, every dyno pull blew a blower belt. That will be corrected quickly. :cussing:

[HEMISFEAR]

Awesome news Bri! I'd love to see that thing on a great track. Definitely getting close brotha.

[BJB]

Yea, today was differently a day of moving forward. When we were trying to get the Jeep ready for Texas, Steve called me on that Sunday morning and wanted to sell the Jeep for scrap metal :pounding table:

Today was a big day in the right direction.

[Derwood98]

Great news Brian. Cannot wait to see that baby run. :thumbsup:

[Immo]

WOW!!!!!!!!!!!!!!!!!!!!!!!!

[Vinnysrt8]

so whats the power does it have.

[BJB]

so whats the power does it have.

They have to finish it up next week as the blower bracket is going to be remade. Should be 820 - 850 to the tires.

[Retro]

Sweet!

[Vinnysrt8]

i cant wait for it to be done where r the videos of it runing

[BJB]

Wilson, was there today and he had is Video camera. Not sure he used it. I will ask. He is driving back to Detroit tonight.

[CHARGERTREV]

Ah so your the jeep josh talks about that lifts the wheels up....bring it to DE so I can see it.

[toothmonger]

Here is a photo I forgot to post. This is the center counsel where all the switches were mounted.

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Preditor/DSC05450.jpg


That red button is whispering at me to push it.

[Retro]

That red button is whispering at me to push it.

You have to excite it first. Little circles.

[Vinnysrt8]

hope has the video.

[BJB]

hope has the video.
Well Vinny, Wilson did take a few.. This is the best one.

http://www.youtube.com/watch?v=bceZxmkyPWQ

[DevssrT]

Bri, your video says its private or something?

[DRKNE55]

brian why the fuck are you sooooo much cooler than me????? haha that is an amazing vehicle. i weld a bit as well and i can honestly say i have yet to see better. totally amazing.

[LS2smkdu]

Damn, the SUV is crazy work man. I've always liked the Jeep SRT8s. How do they drive in the winter? Hmmmm.

[Vinnysrt8]

the video says it private i cant see it.

[Retro]

This is a private video. Please log in to verify that you may see it.

After log in,

This video is private.

If you don't want us to see it just say so. You don't have to lead us on. Be honest we can take it.

[BJB]

This is a private video. Please log in to verify that you may see it.

After log in,

This video is private.

If you don't want us to see it just say so. You don't have to lead us on. Be honest we can take it.

Oops!! Fixing it now :o


I don't know if it is a new link or not but here it is.

http://www.youtube.com/watch?v=bceZxmkyPWQ

[Dr.Steve]

Well Brian, what the hell are the numbers??????

[DevssrT]

Well Brian, what the hell are the numbers??????

Seriously...what are the numbers?!?!?!

[BJB]

Well, as I mentioned before, it was not a complete success because the blower belt is not tracking properly. The bracket / tension pulley assembly is being re fabricated :banghead: The new set-up will be perfect :grinyes:

One of the belts took out the A/C wires.:sad2:

Here is the last pull that they could make (DynoSteve, Wilson and Bull) You can see the belt flying apart. HP at the tires was 722 @ 5600 rpm. A complete pull would normally be almost 7000 rpm

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/Dyno%20Pulls/th_MOV00624.jpg (http://s423.photobucket.com/albums/pp312/BJBSRT8Jeep/Jeep/Dyno%20Pulls/?action=view&current=MOV00624.flv)

[Vinnysrt8]

wow that truck is a monster

[DRKNE55]

holy jesus that is a band.

[Dr.Steve]

:bananalama:sick, I just came. . . Brian you are my hero

[BJB]

Just got an up-date on the supercharger bracket.. The old set-up had 2 mounting points and 1 bent plate attachment.

The new bracket has 5 mounting points :grinyes:

http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Preditor/DSC05506.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Preditor/DSC05507.jpg
http://i423.photobucket.com/albums/pp312/BJBSRT8Jeep/Preditor/DSC05509.jpg

[CentralTexHemi]

I just buy my belts at Wal-Mart pleather is good

[CentralTexHemi]

You have an audio response on youboob

[DevssrT]

Holy hell...that is jsut insane...no belts can contain this monster!

[BJB]

You have an audio response on youboob

Wow, your a poet!! :pounding table:

[Derwood98]

Yes I know, and my balls show it. The thing above it is a long fellow. :pounding table:

[1BAMFR]

Brian...Get that thing to the track and beat that POS Hennesey Jeep before I do

[dynosteve]

soon very soon it will be time to take on the et clocks, now that all the faults have been fixed i cannot see why we shouldnt run a number first pass out

[SRT8 4 J]

That JeeP looks amazing....Congrats on such fine work. Can't wait to see some vids of it in action. Be safe.

[Wilson]

Bump for most recent power numbers

http://www.modernmuscleforum.com/showthread.php?t=513

W